Volvo Workshop Manuals
V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Transmission and Drivetrain > Manual Transmission/Transaxle > Seals and Gaskets, M/T > System Information > Service and Repair > Transaxle Side Seals, M/T > Page 5140
4. Remove driveshaft seal.
Use a lever.
5. Installing new driveshaft seal.
Grease seal lip lightly.
Use drift tool No. 999 5541 and shaft tool No. 999 1801, or equivalent.
NOTE: Do not use old style drift (tool No. 999 5478).
Put the side of the drift marked "M56" against the driveshaft seal.
Put the side of the drift marked "M56" against the driveshaft seal, and turn as shown in picture on right.
Tap driveshaft in gently until drift Is touching transmission casing.
|[PREV PAGE] [NEXT PAGE]|