volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Draining the bevel gear oil

-

Position the bevel gear over a container.

-

Remove the level plug. Allow the oil to run out through the bearing.

-

Wipe away spilt oil from the sealing ring seat on the bevel gear. Use a lint-free rag.

Installation

-

Installing the sealing ring

Transmission and Drivetrain > Transfer Case > Seals and Gaskets, Transfer Case > System Information > Service and Repair > Sealing Ring Crown Wheel Shaft Left Hand Side, Replacing > Page 5237

< PREV PAGE NEXT PAGE >