volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 4
background image

-

Tap the seal into the bevel gear. Use drift 999 7087 . Ensure that the tool goes towards the bevel gear housing.

-

Check that sleeve 7087-1 is removed with the tool.

Finishing

-

Install the bevel gear.

-

Fill the bevel gear with new oil.

Transmission and Drivetrain > Transfer Case > Seals and Gaskets, Transfer Case > System Information > Service and Repair > Sealing Ring Crown Wheel Shaft Left Hand Side, Replacing > Page 5239

< PREV PAGE NEXT PAGE >