V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
Check that the catches (1, 2) point towards the mark V, vertical position. If not: move the catches to mark V.
-
Install the brackets (1, 2) on the CD changer. Use the screws (3) from the kit.
-
Secure both the new nut clips (1) in the plate on the side member (2) and at the rear edge of the wheel arch flange (3) if there are not already
welded nuts there
-
Position the CD changer by the electronic module in the cargo compartment.