volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Tow Bar Wiring, 4-Pin|Page 29748 > < Tow Bar Wiring, 4-Pin|Page 29746
Page 19
background image

-

Remove the two screws in the tailgate sill trim panel.

-

Remove the dummy plug from the hole in the body, see the illustration (battery draining is not affected).

Note! It is only possible to connect one of the functions (rear fog lamps, charging or reversing lamps) according to steps  Tow bar wiring, 7-pin 
See:   -  Tow bar wiring, 7-pin See: . You can also choose not to connect any of the functions.

If the rear fog lamp function will be used: Illustration A 

-

Carefully press down the small catch in the locking mechanism for the grey (GR) 12-pin connector with a small screwdriver. Pull out the locking
mechanism until it stops.

Illustration B

Tow Bar Wiring, 4-Pin|Page 29748 > < Tow Bar Wiring, 4-Pin|Page 29746