V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
-
Remove the middle air baffle (1) by first removing the screws (2). Then depress the catches (3) and pull the baffle back.
-
Remove the engine splash guard (4) by first removing the screws (5).
-
Drill holes for the timer relay in the lower side/front edge of the left-hand front member using a -4 mm (5/32") drill bit.
-
Treat the edges of the holes using a rust-proofing agent.
-
Install the relay with new screws, on the underneath of the front member.