V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Illustrations A and B
-
Pull the gear selector lever knob off the gear selector lever. It may be necessary to twist and turn the gear selector lever knob slightly to remove it.
Hint: Once the gear selector lever knob has been turned 45°, push it forwards and pull from the lug (1) on the gear selector lever. The lug (1) on
the gear selector lever can only be inserted diagonally through the hole in the lower section (2) of the gear selector lever knob.
-
Install the new gear selector lever knob on the gear selector lever. Once turned a ¼turn to the left, press down and twist straight forward
-
Pull the gear selector lever knob to check that it is secure.
Panel Boot Gear Selector, Replacing
Panel boot gear selector, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the panel gear shift selector