V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Check that there are no cracks or large scratches on the flywheel.
To replace the flywheel, see Flywheel See: Flywheel/Service and Repair
Check radial run-out. Refer to: Flywheel, radial clearance, checking, M58, M66, M66 AWD, M56 See: Manual Transmission/Transaxle/Testing and
Inspection/Component Tests and General Diagnostics
Installation
Note! For tightening torques, see: Specifications.
Installing clutch disc's centering drift
Use centering drift 999 5663 Centering tool See: Tools and Equipment/999 5663 Centering Tool , alternatively together with 999 5675 Socket See:
Tools and Equipment/999 5675 Socket. The drift is modified with conversion kit 998 9742 Conversion kit See: Tools and Equipment/998 9742
Conversion Kit.
Remove the cone from the centering tool.
Install the centering tool in the flywheel center as far in as possible.
Use a wrench as a counterhold for the outer section of the centering tool. Tighten the nut so that the expander locks the centering tool in the crankshaft.
Feel that the drift is secured in the crankshaft.
Installing the clutch driven plate
Caution! Turn the side of the clutch disc hub marked "Gearbox side" outward. If the marking on a previously used clutch disc is erased it is
