V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
Constant Velocity Joint Boot: Service and Repair
Boot CV joint housing, replacing
Special tools:
951 2619 Pliers See: Tools and Equipment/951 2619 Pliers
Removal
Note! Preparatory work, left-hand side: See Drive shaft left, replacing See: Service and Repair/Drive Shaft Left, Replacing.
Note! Preparatory work, right-hand side: See Drive shaft right, replacing See: Service and Repair/Drive Shaft Right, Replacing.
Removing the boot
Secure the drive shaft in a vice with soft jaws.
Remove the clamps from the boots.
Cut the boot and remove it from the shaft.
Checking the dimension
Wipe off the grease from the constant velocity joint housing.
Measure the distance from the inner ring to the inner groove on the shaft. Note the measurement.
Removing the CV joint housing