V70R L5-2.5L Turbo VIN 52 B5254T4 (2007)
![background image](/volvo/v70r/l5-2.5l_turbo_vin_52_b5254t4/Page-1253007.png)
the essential information in the illustrations is always correct.
Preparatory work
Remove:
-
the bevel gear. See Bevel gear, replacing See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic
Transmission Components/Bevel Gear, Replacing Bevel gear, replacing, B5254T2, M58, B5254T2, AW50/51 AWD See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission Components/Bevel Gear, Replacing Bevel gear,
replacing See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission Components/Bevel
Gear, Replacing
-
the circlip in the connecting socket.
Action for worn splines in sleeve
Cut a - 40 mm piece of cardboard and use as protection to prevent grinding chips from ending up in the transmission. Apply a thick bead of grease or
vaseline on the seal in the sleeve. Press the piece of cardboard against the seal.
Grind a groove in the inside of the sleeve to enable the expander999 5777 Extractor See: Tools and Equipment/999 5777 Extractor to get a hold.
The sleeve can also be heated with a hot-air gun or induction heater.
Installing tool