V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Secure the door panel to the workbench with a clamp. Protect area between door panel and clamp by using a clean piece of cardboard or cloth.
Grind off any remaining foam from the door panel by using a drill grinding disc (3M) or steel brush if needed.
Clean off panel with compressed air.
All foam must be removed completely.
Replacing
Caution!
Step 10, 11, 12 and 13 must be completed within 8 minutes before the glue starts to cure.
10
Apply adhesive to the panel
Caution!
Use gloves when working with adhesives.
Distribute 2/3 of the adhesive glue tube onto the cleaned wooden surface.
Apply the adhesive using the 3M applicator, use a brush to assure the glue is evenly distributed.
11
Apply adhesive to the inserts
Distribute the rest of the contents of the tube (1/3) around the backside radius of the insert.
12
Distribute the adhesive
