V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Drill a 3 mm hole in lower section of holder. (See illustration).
4
Drilling, rear panels
Drill in the clipholder on the rear door.
Drill a 3 mm hole (x 2) in lower section of holder. (See illustration).
5
Remove the holder for the switches
Heat the bracket connecting the grab handle frame and window switch holder (1).
Caution!
Too much heat will damage the bracket.
Insert a steel putty knife between the bracket and window switch holder. Hold the putty knife so that it heats up at the same time as the adhesive by
moving the heat gun back and forth.