volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Tailgate Panel Attachment - Repairing|Page 8558 > < Tailgate Panel Attachment - Repairing
Page 2
background image

NOTE:

The upper panels must be covered to prevent scratches to upper panels.

Insert a piece of cardboard 180X100mm, (7.00" X 4.00") between panels as per illustration.

Loosen panel with door in open position

3

Carefully pull bottom of panel downwards to release lower clips.

If it is difficult to release from clips, use a trim tool for aid.

Remove panel from tailgate

4

Carefully push panel forward on both sides simultaneously to release from tailgate.

Make sure cardboard is in place.

Remove upper mounting clips from panel.

Loosen up the panel by turning the clips 90 degrees in either direction.

Reinstall clips in tailgate.

Install reinforcement

5

Tailgate Panel Attachment - Repairing|Page 8558 > < Tailgate Panel Attachment - Repairing