V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Vacuum Vent Valve: Service and Repair
Replacing brake and clutch valves
Removing
-
Ignition off.
-
Remove soundproofing panel on driver's side.
-
Carefully remove brake/clutch valve from bracket.
-
Disassemble connector and disconnect vacuum hose from brake/clutch valve.
Installing
-
Assemble connector and connect vacuum hose to brake/clutch valve.
-
Install brake/clutch valve. Check location in bracket.
-
Shake (do not pull) brake/clutch valve lightly and check that it is secure.
-
Press pedal so that it is not in contact with the brake/clutch valve.
-
Pull piston out as far as possible and release pedal slowly. The brake/clutch valve will then adjust itself automatically.
Check function and check that brake/clutch valve is airtight.
-
Reinstall soundproofing panel.