volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Air Door Cable, HVAC|Service and Repair|Page 6659 > < Air Door Cable, HVAC|Service and Repair|Page 6657
Page 3
background image

-

Detach the control cables from the rear panel.

Installing

-

Install the control cables on the rear panel.

-

Install the cable fastening on the rear panel.

TTTF8 Installing control cables/mechanical rear plate

-

Locate control cables/mechanical rear plate in position through the opening for the radio.

-

Feed in the control cables to their correct position.

-

Pull the connectors through the opening to the control panel/front section.

-

Install control cables/mechanical rear panel.

TTTF9 Installing control panel/front section

-

Connect connectors.

-

Screw control panel/front section into position.

-

Install passenger compartment temperature selectors (dial knobs).

TTTF10 Installing control cables on climate control unit

-

Install cable on actuator arm.

-

Turn the passenger compartment temperature selector counter-clockwise as far as possible.

-

Press actuator arm to the bottom position.

-

Install cable sleeve in the cable fastening.

TTTF11 Check

Air Door Cable, HVAC|Service and Repair|Page 6659 > < Air Door Cable, HVAC|Service and Repair|Page 6657