V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Removing control panel/front section
Remove passenger compartment temperature knobs.
Remove Torx 15 screws.
Disconnect electrical connectors.
Remove control panel/front section.
3
Installing control panel/front section
Connect electrical connectors.
Screw control panel/front section into place.
Install new passenger compartment temperature knobs.. Reinstall radio.
4
Finishing
Check that the blower fan functions at all fan settings.
Start the car and allow it to idle for at least 2 minutes so that the damper motors self adjust.
Note!
The fan must not be in zero position.
Removing the Diode Kit
1
Removing power diode
