volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Expansion Valve|Service and Repair|Page 6874 > < Procedures|Page 6870
Page 1
background image

Expansion Valve: Service and Repair

Special tools: 999 5385, 999 5472

TTTM1 Before starting work on refrigerant circuits

WARNING!  FOLLOW THE SAFETY PRECAUTIONS FOR WORK ON AC SYSTEMS. SAFETY INSTRUCTIONS WHEN HANDLING 
REFRIGERANT
 See: Service Precautions/Technician Safety Information

NOTE!  At the Receiver/Drier always install new O rings in pipes and quick-release connectors. Always plug pipes and couplings when working on the
climate control system system.

NOTE!  Read the section on oil in the system according to BG. See: Service and Repair

Replacing refrigerant pipe/hose; compressor - condenser

TTTM2 Removing refrigerant pipe/hose; compressor - condenser

-

First read TTTM1. 

-

Drain system of refrigerant according to BD. 

-

Raise car.

-

Remove air baffle.

-

Detach pipe/hose from condenser.

-

Detach pipe/hose from compressor.

TTTM3 Installation of refrigerant pipe/hose; compressor condenser

In reverse order.
Tightening torque 25 ± 6 Nm (19 ± 4 ft.lb).

Replacing refrigerant pipe/hose; condenser - member

Expansion Valve|Service and Repair|Page 6874 > < Procedures|Page 6870