volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Housing Assembly HVAC|Service and Repair|Page 6898 > < Housing Assembly HVAC|Service and Repair
Page 2
background image

-

Remove the pipes from the evaporator using special tool 999 5838 and 999 5472 and plug the pipes.

-

Remove the cover plate and rubber seal for lead-in.

Operations in passenger compartment

-

Remove the ECC control module according to  See: Control Module HVAC/Service and Repair

-

Remove the MCC control module according to  See: Control Assembly/Service and Repair

-

Remove dashboard, refer to Boday and Frame - Dash Board - Service and Repair - Procedures   See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair

-

Right-hand drive car:
-

disconnect control module box fresh air intake hose

-

Remove floor carpet mountings.

-

Remove the cable tie straps to expose the passenger side floor duct pipe.

-

Disconnect the floor duct pipes for floor ducts from the climate control unit.

-

Also remove the RTI (road traffic information) or amplifier bracket if installed.

-

Remove the RTI member with its mounting on the cowl side on the passenger side

-

Remove knee bolster if applicable

Housing Assembly HVAC|Service and Repair|Page 6898 > < Housing Assembly HVAC|Service and Repair