volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Body - Tailgate Handle/Moisture in License Plate Light|Page 9242 > < Lamp Out Sensor|Locations|Page 9237
Page 1
background image

License Plate Lamp: Technical Service Bulletins
Body - Tailgate Handle/Moisture in License Plate Light

Section
8

Group
83

No.
0011

Year
98

Month
11

V70 
1998-

Vehicles involved: V70 1998-

83-0011; Tailgate handle, moisture in the license plate light assembly; 98/11

Background:

In the event of moisture in the license plate light assembly, the seal between the tailgate handle and the bodywork must be replaced. The seal is delivered
with the bulb holder and wiring pre-installed.

Materials:

Seal (assembly)

1

9187648-2

Wheel bearing grease (sealing

1

1161241-3

compound)

LICENSE PLATE, CORRECTIVE ACTION IN THE EVENT OF MOISTURE

1

Removing the tailgate handle

Remove the panel and the wiper unit from the tailgate according to the method in Service Manual Section 8 (82-86, 88) Interior, exterior S70/V70 1997-
Section DA (panel) and the method in Service Manual Section 3 (35-38) Lighting, instrumentation and other electrical equipment S70/V70 1997 Section
CB (wiper unit).

Body - Tailgate Handle/Moisture in License Plate Light|Page 9242 > < Lamp Out Sensor|Locations|Page 9237