V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Remove the entire lamp assembly and separate the bulb socket from the housing.
Drill ventilation hole
2
Use a 1/8" drill bit.
Slide a piece of rubber hose over the bit so that only 1/8" of the drill bit is visible.
This will keep the bit from plunging during drilling. Drill a number of holes that together form a 5/16" (8 mm) oblong hole.
Be careful not to damage the lens when the drill passes through the lamp housing.
Reinstall lamp assembly with bulb and ensure function of turn signal.
WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.
