V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
cover over fuel rail.
2 fuel lines clamps to prevent pipes bending, see Illustration.
Carefully remove both retaining clamps for the fuel pipes to prevent fuel spillage when the fuel rail is removed.
the return pipe at the pressure regulator.
pressure regulator vacuum hose.
(The above two points apply only to cars with return fuel system)
fuel rail mounting screws.
Carefully work off fuel rail.
Disconnect the fuel rail from the fuel line by twisting it through 90° and carefully pulling it away from the fuel line. Place paper under the connection to
absorb any fuel leakage.
delivery line from the delivery line under the car at the sub-frame. The delivery line is marked with yellow tape.
Installing delivery lines
Install a new O-ring on the delivery line.
Carefully press in pipe and nipple into fuel rail.
Lubricate nipple 0-ring with petroleum jelly.