V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Remove the airguide for the radiator.
Drill out the existing hole in the charge air cooler (CAC) with a 9.5 mm (3/8") drill bit.
Wipe clean any drillchips of the hole and the surrounding area with cleaner H, P/N 1161436-9.
Installing the plug
Do not over tighten the nipple, to avoid damaging the tank.
Cut of the tip of the nipple so that 5 mm (3/16") remains.
Apply quick drying adhesive (P/N 1161434-4) on the nipple threads.
Screw in the nipple.
Install the air guide for the radiator.
Start engine to ensure engine operation.
WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type