V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
31. On right-hand drive models:
Install steering gear guard plate.
Tighten the two bolts to: 80 Nm
EVAP canister holder and hose on sub-frame.
Clip all hoses to frame with a band clamp.
Splash-guard under engine. (Early type)
The front cover.
Press into position at front.
Press forward and press upward at rear so that guide spigot is seated in slot.
33. Reinstallation of link/ball joint to wheel spindle
Remove protective sleeve.
NOTE: Take care that the ball joint boot is not damaged.