V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Note!
To achieve correct torque, it is very important to leave a gap (A) between the vise grip and the nut.
11
Installing the stud in the airbag
Install the stud where the previously removed screw was located. Torque to 10 Nm (7 ft lb.).
12
Connecting permanent ground strip to the stud
Install the free end of the permanent ground lead on the stud and point it toward the passenger door.
Secure the ground lead with the remaining nut from the kit.
Torque to 10 Nm (7 ft lb.).
13
Securing the permanent ground lead