volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

SRS Connector|Page 7207 > < Side Impact Protection System <--> [Side Air Bag]|Inspection|Page 7204
Page 1
background image

Side Impact Protection System: Service and Repair
SRS Connector

SRS connector

Removing the SIPS bag control module connector

Note!

Take care when separating the connectors. If the connector breaks the whole cable harness must be replaced.

Note!

Always replace the clip if it has been removed.

-

Press on the side so that the bag goes over the edge (1).

-

Separate the connector.

-

Bend the clip at the front edge (2).

-

Move the clip backwards.

-

Remove clip.

Install:

In reverse order.

SRS Connector|Page 7207 > < Side Impact Protection System <--> [Side Air Bag]|Inspection|Page 7204