V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Installing the seat belt buckle
Install:
-
the clips for the cable harness
-
one screw for the seat belt buckle. Tighten to 48 Nm
-
the four screws for the seat mounting
-
the side piece from the rear mounting for the seat
-
the side piece from the front mounting for the seat
-
the connectors.
Completion
Check seat belt function
Check that the seat belt (inertia) reel locks as it should. Test the function: Pull it out and jerk it repeatedly.
Ignition in position II. Reconnect the battery negative lead
Warning! Ensure that nobody is in the car when the battery is being connected.
Check
Check that the SRS indicator lamp in the combined instrument panel is not constantly lit.
Note! Check that the SRS indicator lamp is not defective: Turn the key to position II. The SRS indicator lamp should light and go out after
approximately 15 seconds.
