Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4538

Page 12
background image

31. On right-hand drive models: 

-

Install steering gear guard plate.

Tighten the two bolts to: 80 Nm

32. Install:

-

EVAP canister holder and hose on sub-frame.

Clip all hoses to frame with a band clamp.

-

Splash-guard under engine. (Early type)

-

The front cover.

Press into position at front.
Press forward and press upward at rear so that guide spigot is seated in slot.
Install screws.

33. Reinstallation of link/ball joint to wheel spindle

-

Remove protective sleeve.

NOTE:  Take care that the ball joint boot is not damaged.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4538

[PREV PAGE] [NEXT PAGE]