Volvo Workshop Manuals
V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Linkage, A/T > Selector Shaft, A/T > Component Information > Service and Repair > Page 4754
Adjust gear position sensor, refer to Powertrain Management.
6. Reinstallation, continue
Dipstick pipe bracket.
Make sure that the O-ring on the pipe is in place.
Rod arm on control shaft.
Tighten to: 16 Nm.
Transmission cable on rod arm with washer and lock clips.
Apply grease part No. 1161241-3, or equivalent, sparingly to rod arm pin.
7. Reinstallation of engine compartment components
Air filter bracket
8. Checking DTCs
Using a suitable scan tool, check that DTC's have been cleared.
|[PREV PAGE] [NEXT PAGE]|