Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)

Transmission and Drivetrain > Differential <--> [Differential Assembly] > Viscous Coupling, Differential > Component Information > Technical Service Bulletins > Customer Interest for Viscous Coupling: > 4460001 > Feb > 00 > Rear Axle/Final Drive - Whining Noise > Page 5014

Page 3
background image

Note!  Refer to the illustration, and mark mount accordingly, to ensure correct center location for drilling.

Move the drill up.

Support the drill against the propeller shaft and the heat deflector plate.

Align the drill with the center of the mounting.

Drill.

4

Installing the counterweight

Remove the backing from the counterweight.

Press the counterweight into place on the mounting.

Install the screw.

Caution!  Make sure the counterweight is positioned so it doesn't interfere with any other parts of the undercarriage.

5

Installing the viscous coupling housing

Lift up the viscous coupling housing using the jack.

Install a new bolt screw.

Tighten to 85 Nm (63 lb.ft).

WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.

Transmission and Drivetrain > Differential <--> [Differential Assembly] > Viscous Coupling, Differential > Component Information > Technical Service Bulletins > Customer Interest for Viscous Coupling: > 4460001 > Feb > 00 > Rear Axle/Final Drive - Whining Noise > Page 5014

[PREV PAGE] [NEXT PAGE]