Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Installing Propellar Shaft, All-Wheel Drive (AWD) > Page 5104

Page 11
background image

-

Install:
-

the propeller shaft 

-

the screws (2). Tighten to 25 Nm 

-

the screws (1). Tighten to 25 Nm.

Installing the rear propeller shaft

-

Check that the viscous coupling and propeller shaft flange mating surfaces are clean. 

-

Install the propeller shaft as marked. Use new screws of the same length. Place the screws in the same position as before. Tighten the screws
crosswise. First tighten to 8 Nm. Then tighten to 30 Nm

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Installing Propellar Shaft, All-Wheel Drive (AWD) > Page 5104

[PREV PAGE] [NEXT PAGE]