Volvo Workshop Manuals
V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Shaft Assembly > Axle Shaft > Component Information > Service and Repair > Front > Page 5046
4. Tighten driveshaft center nut.
Use counterhold tool No. 999 5461 (4 wheel bolts) or tool No. 999 5540 (5 wheel bolts) and protractor tool No. 951 2050, or equivalents, and
Brake pipe/ABS lead bracket.
NOTE: Check that ABS sensor seat is absolutely clean first
First clean ABS sensor with a soft brush; then fit it to wheel shaft and tighten to: 10 Nm.
6. Install front wheel.
Check that brake disc and pad contact surfaces are clean.
Install bolts, but do not tighten.
When tightening using a socket wrench, use torque sleeve tool No. 1158147-7, or equivalent.
|[PREV PAGE] [NEXT PAGE]|