Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)

Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Shaft Assembly > Constant Velocity Joint > Component Information > Service and Repair > Front > Page 5056

Page 2
background image

6. Carefully tap off inner cover Remove inner clip. Push gaiter over drive (axle) shaft.

7. Remove:

-

grease, until circlip is visible

-

circlip

8. Press joint off shaft Use drift.

Remove gaiter from drive (axle) shaft and wash shaft clean.
When replacing gaiters only: Remove original gasket from joint. Carefully wash joint clean and rinse with clean washing fluid. Blow joint dry.
Check that balls and races of joint are free of damage.
Remove gaiter from inner cover. Wash both covers clean of grease and sealing compound.

9. Install/mount:

-

new gaiter and inner cover

-

universal

Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Shaft Assembly > Constant Velocity Joint > Component Information > Service and Repair > Front > Page 5056

[PREV PAGE] [NEXT PAGE]