Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)

Transmission and Drivetrain > Transfer Case > Seals and Gaskets, Transfer Case > System Information > Service and Repair > Sealing Ring Crown Wheel Shaft Left Hand Side, Replacing

Page 1
background image

Seals and Gaskets: Service and Repair
Sealing Ring Crown Wheel Shaft Left Hand Side, Replacing

Sealing ring crown wheel shaft lefthand side, replacing

Special tools:

999 7086
999 7087

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the

essential information is always correct.

Preparatory work

-

Remove the bevel gear.

Removing the sealing ring

-

Position the bevel gear on a workbench. Support the gear using a wooden block.

-

Use extractor 999 7086. Knock the seal towards the housing using the extractor sleeve.

-

Remove the seal using the impact driver handle of the extractor.

-

Check thoroughly that no seal residue remains.

Transmission and Drivetrain > Transfer Case > Seals and Gaskets, Transfer Case > System Information > Service and Repair > Sealing Ring Crown Wheel Shaft Left Hand Side, Replacing

[PREV PAGE] [NEXT PAGE]