volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 9451 > < Reading and Clearing Diagnostic Trouble Codes|Page 9449
Page 37
background image

Replacing Component

Replacing Component

Replace the hood switch.

After performing this procedure See: Checking Signal From Hood Switch/Verification 

Verification

Verification

Hint: After carrying out the repair check that the fault has been remedied as follows:

-

Ignition off.

-

Reconnect connectors, reinstall components.

-

Ignition on.

-

Hood open.

Read off the hood switch status.
The value should be HIGH when the hood is open.

Fault Tracing Information

Fault Tracing Information

Condition

-

No diagnostic trouble codes (DTCs) stored.

Possible source

-

Open-circuit in signal cable to starter relay.

-

Defective VGLA control module.

Checking Car

Checking Car

Check the car market code.
The easiest way to do this is to look at the product plate in the engine compartment and read from the DD field as illustrated.

Is the code 30, 31 or 39?

Reading and Clearing Diagnostic Trouble Codes|Page 9451 > < Reading and Clearing Diagnostic Trouble Codes|Page 9449