V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
^
Install the mass dampers as shown (one on each front caliper).
^
Use two new bolts (supplied in kit) on each caliper. (Torque to 100 Nm / 74 ft lbs).
Removing brake pad shims
3.
^
Remove the brake pads. Remove and discard the two stainless steel shims attached to each brake pad.
^
Grease the brake pads and the contact surfaces in the brake caliper with the silicone grease (1161688).
^
Reinstall pads
Note!
The brake pads are marked with directional arrows that will point downwards.
SERVICE REAR BRAKES:
If there is a squealing noise from the rear brakes and the vehicle is below the listed chassis # replace the rear brake pads using PN 30683858, apply
grease PN 1161688. If these pads PN 30683858 have been installed previously, it will not be necessary to replace them again.
Material
