V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Slacken off, but do not remove the screws which secure the timing gear pulley to the VVT unit.
Press the variable valve timing unit / timing gear onto the camshaft.
Install the centre screw which secures the variable valve timing unit to the camshaft. Tighten slightly.
Turn the variable valve timing unit counter-clockwise as far as it will go. Remove the centre screw.
Position the upper timing cover.
Turn the timing gear pulley clockwise until the screws at the oval holes are in the limit position. Continue turning clockwise until the timing gear pulley
marking is
1½ cogs before the marking on the upper timing cover.
Note! Do not turn anti-clockwise during this procedure.