V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Raise the car.
Remove:
-
the right front wheel
-
the nuts for the cover in the wing liner.
Install the upper timing belt cover.
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
Turn the crankshaft a further 1/4 of a turn clockwise, then back counter-clockwise until the markings correspond.
The markings are illustrated.
Remove the upper timing belt cover.
Removing the timing belt
Remove:
-
the belt tensioner
-
the centre screw for the belt tensioner slightly.
Hold the centre screw still. Turn the tensioner eccentric clockwise to 10 o'clock using a 6 mm Allen key.
Remove the timing belt from the camshaft pulleys.
Removing the timing gear pulley with the variable valve timing unit