V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Remove:
-
the cover at the side of the air cleaner (ACL)
-
the fresh air intake hose
-
the air cleaner (ACL).
Removing the front bumper
Remove the front bumper. See: Bumper front, replacing See: Body and Frame/Bumper/Front Bumper/Service and Repair.
Installation
Installing the mounting for the cooler
Install:
-
the mounting on the right-hand side. Use 2 x M6x12 and washers
-
the mounting on the left-hand side. Use an M6x10. Move the mounting so that it is 10-15 degrees above vertical
-
tighten the screws on the mountings. Tighten to 8 Nm.
Removing screws
Raise the vehicle. Position mobile jack 998 5972 JACK See: Tools and Equipment/998 5972 Jack using universal plate 999 5972 FIXTURE See:
Tools and Equipment/999 5972 Fixture. Position the hoist under the left-hand side of the sub-frame.