V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Heat the socket to 150° - 175°C in an oven. Place the socket in drift 999 5778. Install the drift in the transmission and tap the socket until it engages in
the differential.
The above operation must be carried out quickly to prevent the heat spreading to the differential and causing the differential to expand.
Control measurement: the distance from the end of the connecting socket to the flat surface outside the sealing ring seat on the transmission housing
must be approximately 41 mm.
Note: Use protective gloves when handling the heated socket. Care must be also taken to prevent burns in the remaining operations.
Installing the sealing ring for the connecting socket
Lubricate the sealing ring lip and the mating surface on the socket. Use ATF fluid.
Insert the sealing ring onto the socket. Tap the socket into place using drift 999 5780. Tap in the drift until it is in contact with the transmission
housing.
Installing the sealing ring for the differential