V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Remove the gear selector cable from the ball joint. Use: 999 7071 Puller See: Tools and Equipment/999 7071 Puller.
Hint: The screw on the puller is turned counter-clockwise to pull the gear selector cable loose.
Carefully pry up the catches (1) and slide the cable sleeves upwards on both the gear selector cables.
Remove the gear selector assembly.
Removing the gear selector cables
Pull the gear selector cables straight out.
Hint: It is easier taking one gear selector cable through the firewall at a time.
Hint: Do not damage the cable harnesses in the center console when removing the gear selector cable.
Installation
Note! For tightening torques, see applicable specifications.
Preparations for installing the mechanical cables