V70R AWD L5-2.5L Turbo VIN 52 B5254T4 (2004)
Shifter M/T: Overhaul
Gear selector lever assembly, reconditioning
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the center console
Remove:
-
the S60R center console (B5254T4 engine). See: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Center Console, Replacing
-
the S60 center console. See: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center
Console, Replacing (-2004) or: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center
Console, Replacing (2005-)
-
the V70 center console. See: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center
Console, Replacing (-2004) or: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center
Console, Replacing (2005-)
-
the V70XC/XC70 center console. See: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Center Console, Replacing (-2004) or: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Center Console, Replacing (2005-).
Removing the gear selector assembly and cables
Remove the gear selector assembly and cables from the XC90. See: and on the S60 and V70. See: Transmission cables, replacing, B5244T5, M66 See:
Shift Linkage/Shift Cable/Service and Repair.
Removing components from the gear selector assembly
Remove:
-
the catch for the bevel arm
-
bevel arm with bushing and spring
-
the cover for the gear selector lever ball joint. Pull up the ball joint, gear selector lever and rubber sleeve from the gear selector assembly