V90 L6-2.9L VIN 96 B6304S (1998)
Oil Pan: Service and Repair
REPLACE THE OIL SUMP
Special tools: 951 1205, 999 5460, 999 5716, 999 5972
Preparation
Remove the ignition key.
Installing the lifting beam and lifting hook
Position the lifting yoke as illustrated.
Tension slightly.
Removing components
Remove
-
the mass air flow (MAF) sensor from the air cleaner (ACL) housing
-
the upper section of the air cleaner (ACL) housing
-
the preheating hose.
Removing the front suspension
Slacken off the upper nuts for the engine pads a few turns.
Note! Do not remove the nuts yet.
Remove the four mounting screws from the front suspension member.