Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Powertrain Management > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Specifications > Page 2157

Page 4
background image

Removing Solenoids SL and STH 
-

Remove fluid strainer (3 screws).

-

Remove solenoid retainer.

-

Withdraw solenoids SL and STH from control system.

-

Install new solenoids SL and STH

-

Install solenoids SL and STH complete with retainer and screws. Tighten to 10 Nm (7.5 ft lb).

-

Clean fluid strainer carefully

-

Inspect strainer and seals. If required, replace strainer and seals as a unit.

-

Install strainer.

-

Tighten screws to 10 Nm (7.5 ft lb).

Installing New Solenoids S1 And S2 

-

Lubricate new solenoid 0-rings lightly with Vaseline. Install solenoids S1 and S2 with common screw. Tighten to 10 Nm (7.5 ft lb).

Powertrain Management > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Specifications > Page 2157

[PREV PAGE] [NEXT PAGE]