Volvo Workshop Manuals
V90 L6-2.9L VIN 96 B6304S (1998)
Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Technical Service Bulletins > Customer Interest for Control Module HVAC: > 887955 > Sep > 97 > A/C - Unpleasent Odor On Startup > Page 167
Connecting and mounting control module in cars without SRS (Airbag) and knee bolster
Connect control module and cable harness connectors.
Apply three sections of butyl tape to the control module.
Install control module to dashboard side section with butyl tape.
Install control module on front of air hose under glove compartment with butyl tape and cable ties round duct and control module as illustrated.
Attach cable harness to existing cable harness at side of SRS (Airbag) module with 2 cable ties, one as near to the connector as possible to avoid
Attach cable harness to existing cable harness module with 2 cable ties, one as near to the connector as possible to avoid vibration on uneven road
Connect the black-white cable included in the new cable harness to the ground plate on the right side of the cowl.
The ground plate is located behind the fuel control module.
|[PREV PAGE] [NEXT PAGE]|