Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Testing and Inspection > Fuel Level Sensor Fault Tracing > Page 508

Page 1
background image

Fuel Gauge Sender: Testing and Inspection
Auxillary Tank Sensor Fault Tracing

-

Remove battery negative lead.

-

Unplug connector and measure with an ohmmeter between the white-gray leads. Resistance should be between 0 Ohm, with auxiliary tank empty,
and 60 Ohm, with auxiliary tank full. 
If resistance reads infinity, measure directly on the sensor terminals.
With resistance other than between 0 and 80 ohm, the sensor is faulty and needs changing.

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Testing and Inspection > Fuel Level Sensor Fault Tracing > Page 508

[PREV PAGE] [NEXT PAGE]