V90 L6-2.9L VIN 96 B6304S (1998)
Output Shaft Bearing/Bushing: Service and Repair
Rear Extension Housing Bearing, Replacement
Special tools: 9985972, 9995088, 9995149, 9995244, 9995304, 9995492, 9995496
NOTE: Cleanliness is extremely important when working on automatic transmissions. Always use clean containers and ensure that the workplace
is free of dust and dirt.
-
Remove plug and drain fluid from oil pan.
CAUTION: Fluid may be extremely hot if car has recently been driven.
-
Reinstall plug with new seal. Tighten to 20 Nm (15 ft lb).
-
Position assembly hoist under transmission.
-
Position assembly hoist and universal fixture 998 5972 under transmission, with fixture in light contact with housing.
-
Undo clips securing H02S lead to transmission member
-
Remove transmission member.
-
Disconnect propeller shaft using special tool 999 5244.
-
Move propeller shaft aside and secure with cable tie.
-
Remove bolts (four) in transmission mounting bracket. Remove bracket.