XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Accessory Control Display: Scan Tool Testing and Procedures
Description Of Reading Off Of Extended Diagnostic Trouble Code (DTC) Information
Description of reading off of extended diagnostic trouble code (DTC) information
Description of frozen values See: Description of Frozen Values, HLDF
Description of status identifier See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Vehicle Communication Information, Engine Control Module (ECM)/Description of Status Identifier
Description of counter See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Vehicle
Communication Information, Engine Control Module (ECM)/Description of Counter
Description Of Parameters
Description of parameters
Parameters, status
Active signal source
Indicates the signal source that is active.
RGB = RGB input normally always connected to the multimedia module (MMM).
Video 1= Video input 1, composite video signal input.
Video 2= Video input 2, composite video signal input.
Upper limit position switch
Indicates the status for the upper limit position switch.
Activated= The display is in its upper limit position.
Not Activated= The display is not in its upper limit position.
Note! XC60 does not have powered screen raising/lowering.
Lower limit position switch
Indicates the status for the lower limit switch.
Activated= The display is in its lower limit position.
Not Activated= The display is not in its lower limit position.
Note! XC60 does not have powered screen raising/lowering.
Sensor background lighting
Displays the status of background lighting.
OK= Background lighting works.
Not OK= Background lighting does not work.
Parameters, value
RGB luminance
Indicates the current level setting of background lighting.
Measurement range 10 to -10.
Power supply, HLDF
Indicates the power supply to the High Level Display Front (HLDF).
Measurement range 6 to 20 V.
The normal value when the alternator is charging: 13.0-14.5 V.
Internal temperature
Indicates the internal temperature in the High Level Display Front (HLDF).
Measurement range -40 to 120 ËšC.