XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
-
Remove the lower panel by prying it off around the edge using a weatherstrip tool. Then carefully pull it off so that all the clips on the inside
release.
-
The cradle (1) in the centre of the inside of the panel is securely fastened. To release its catches it may be necessary to insert a screwdriver into the
side of the panel, press the catches on both sides and remove the panel (see image B).
-
If the car is equipped with a KV antenna, remove its connector.
Illustrations A and B
-
Remove the six nuts securing the handle.