XC60 FWD L6-3.2L VIN 96 B6324S2 (2010)
Applies to cars that do not have a pre-mounted display.
-
Connect the connector (1) that was disconnected from the tunnel console's left-hand side to the corresponding connector (2) in the routed adapter
cable.
-
Attach clips to the cable harness in the tunnel console.
-
Connect the remaining connectors to each other.
-
Wrap foam tape around the loose connectors and position them inside the mats so that they do not move.
-
Secure the long cables at the existing cable harness using cable ties from the kit.
Applies to all models