volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Wheels - Wheel Bolts Rusting/Corroding|Page 13092 > < Wheels - Wheel Bolts Rusting/Corroding|Page 13090
Page 8
background image

Illustrations A and B

-

Carefully pry off the centre console panel. Start at the rear edge on both sides, the panel is secured with two clips on the long sides, three catches at
the top and with four catches around the gearshift panel.

-

Lift up the panel a little and make sure that all cables are free from the gear lever carrier and components in the tunnel console and then lift it out.

Wheels - Wheel Bolts Rusting/Corroding|Page 13092 > < Wheels - Wheel Bolts Rusting/Corroding|Page 13090